Don't buy a new combine just to get yield maps. Upgrade your existing fleet with Green Growth's universal yield sensors. Compatible with John Deere, CLAAS, Case IH, New Holland, and more.
Request a DemoMost yield monitors are expensive, hard to install, and tied to specific brands. We built a universal system that gives you precision agriculture data without the six-figure price tag of a new harvester.
Works on any combine harvester, regardless of age, make, or model. Perfect for mixed fleets.
Advanced optical sensors avoid the constant load-wagon re-calibration that impact plate systems need — set up calibration in software and re-run it remotely if conditions change.
View yield maps instantly on your phone or tablet. Data syncs automatically to the cloud.
| Feature | Factory Installed | Green Growth Retrofit |
|---|---|---|
| Cost | High (often requires new machine) | Affordable Upgrade |
| Installation | Factory only | 2-4 Hours (DIY friendly) |
| Calibration | Frequent (Load wagon) | Remote (no load wagon) |
| Data Access | Proprietary formats | Universal (Shapefile, ISOXML) |
Join hundreds of farmers optimizing their fields with Green Growth.
Get StartedYes. Our system is designed to retrofit older combines that never had yield monitoring capabilities. As long as the elevator is accessible, we can install our sensors.
Yes! We have a dedicated Potato Yield Monitoring solution compatible with Grimme, Dewulf, and other bunker harvesters.
Our optical sensors typically achieve 95-98% accuracy when compared to weighbridge tickets, often outperforming factory-installed impact plates.
The Green Growth Yield Monitor is compatible with any combine harvester brand and model — including CLAAS, John Deere, New Holland, Case IH, Fendt, Massey Ferguson, and older machines. The only requirement is a clean grain elevator and 12V power supply.
Installation takes approximately 2 hours and requires no specialist dealer or tools. The system includes step-by-step instructions and sensor mounting hardware.
The Green Growth Yield Monitor supports all cereal crops including wheat, barley, oats, and rapeseed. A separate sensor system is available for potato harvesters.
Yes, but it is quick and fully remote. Unlike impact-plate monitors, the Green Growth Yield Monitor never needs physical load-wagon weigh runs in the field — calibration is set up in software and can be re-run remotely at any time, including during a harvest.
The Green Growth Yield Monitor uses optical sensors to measure grain flow continuously, producing high-accuracy yield maps that reveal true field variability. Our sensors typically achieve 95–98% accuracy when compared to weighbridge tickets, often outperforming factory-installed impact plate systems.