Retrofit your Massey Ferguson — IDEAL 7/8/9, Activa, Beta, Centora, Delta, or heritage MF 7370, 8780, 9505 — with optical yield sensing. No calibration loads, ISOXML to AGCO Connectivity.
Request a DemoFrom a heritage MF 8780 still earning its keep in the Canadian prairies to a brand-new IDEAL 9 in Argentina, the Green Growth retrofit installs on the clean grain elevator with the same hardware. Independent of AGCO Connectivity, Datatronic and FendtONE subscriptions.
Included 4G cellular sends data to the cloud without AGCO Connectivity or Datatronic subscriptions.
Native Shapefile and ISOXML imports straight into AGCO Connectivity, FendtONE and any FMIS.
Optical sensing eliminates calibration loads required by Datatronic impact-plate measurement.
Selected models below.
| Series | Models |
|---|---|
| IDEAL (single-rotor, AGCO flagship) | IDEAL 9, IDEAL 8, IDEAL 7 (2017–current) |
| Activa / Activa S (walker, EU) | Activa 7340, 7344, 7345, 7347; Activa S 7344, 7345, 7347 |
| Beta (walker, EU) | Beta 7360, 7370 |
| Centora (walker, EU) | Centora 7280, 7282, 7284, 7286, 7370 |
| Delta (walker, EU) | Delta 9280, 9380, 9282, 9382 |
| North America heritage | MF 9505 (single-rotor); MF 9795, 9695 (twin-rotor); MF 8780, 8780XP |
| Legacy MF walker | MF 8590, 8460, 8270, 7370, 38, 40 series |
| Heritage 800-series | MF 860, 865, 8590 — 1990s–early 2000s walker combines |
| Laverda-built MF (Europe / Africa) | Various 4–6 walker frames shared with Fendt L-series and Laverda M series |
A complete retrofit kit — optical yield sensor, GPS antennas, telemetry module and connectors. Standard install on the clean grain elevator, or plug-and-play CANBUS on modern IDEAL through the OEM diagnostic port.
Optical sensor head mounts above the clean grain elevator paddles. Cab module handles GPS, processing and 4G cellular sync.
Tell us your model and year — we'll confirm fitment and ship the right kit.
Contact SalesEvery Massey Ferguson combine. Modern IDEAL 9, 8 and 7 (single-rotor, AGCO platform); Activa 7340, 7344, 7345, 7347; Activa S 7344, 7345, 7347; Beta 7360, 7370; Centora 7280, 7282, 7284, 7286, 7370; Delta 9280, 9380; legacy MF 9505 (single-rotor, North America); MF 9795, 9695 (North America); MF 8780, 8590, 8460; MF 7370, 7370 Beta; heritage MF 38, 40, 8780XP and the 800-series walker family from the 1990s–2000s.
Yes. Massey Ferguson and Fendt share the AGCO platform, so the retrofit's Shapefile and ISOXML exports import into AGCO Connectivity, FendtONE, Datatronic and any ISO 11783-10 FMIS.
Yes. Heritage MF 8780, 8590, 8460 and the 800-series walker combines accept the standard retrofit on the clean grain elevator — typically faster to install than on modern combines because there's no factory CAN system.
Yes — IDEAL on the Massey Ferguson and Fendt brands share the AGCO platform. The same retrofit kit fits both with identical installation procedures.