Retrofit your John Deere — X9, S-Series, S7, T-Series, W-Series or legacy STS/WTS — with optical yield sensing. No calibration loads, no JDLink subscription, full ISOXML export to Operations Center.
Request a DemoFrom a 1995 John Deere 9600 still earning its keep to a brand-new X9 1100, the Green Growth retrofit installs on the clean grain elevator with the same hardware. Independent of GreenStar, CommandCenter, JDLink and StarFire — works whether your subscriptions are active or not.
Included 4G cellular link sends data to the cloud without any John Deere subscription or unlock fee.
Native Shapefile and ISOXML exports import straight into John Deere Operations Center.
Optical sensing eliminates the calibration loads required by GreenStar / CommandCenter impact-plate systems.
The most complete John Deere compatibility list in retrofit yield monitoring. Selected models below — if your machine isn't listed, ask us.
| Series | Models |
|---|---|
| X-Series (X9) | X9 1000, X9 1100 (class 10 and 11, single-rotor, 2020–current) |
| S7 Series | S7 600, S7 700, S7 800, S7 900 (2024–current) |
| S-Series | S660, S670, S680, S690 (2012–2018); S760, S770, S780, S790 (2018–2023) |
| T-Series (walker, EU) | T550, T560, T660, T670, T770 (2009–current) |
| W-Series (walker, EU) | W540, W550, W650, W660 (2009–current) |
| 70-Series STS | 9570 STS, 9670 STS, 9770 STS, 9870 STS (2008–2011) |
| 60-Series STS | 9560 STS, 9660 STS, 9760 STS, 9860 STS (2007–2008) |
| 50-Series STS | 9550 STS, 9650 STS, 9750 STS (2002–2006) |
| WTS-Series (EU walker) | 9540 WTS, 9560 WTS, 9640 WTS, 9660 WTS, 9680 WTS (1998–2008) |
| CWS / CTS | 9780 CWS; CTS, CTS II twin-rotor combines |
| Legacy 9000-Series | 9400, 9410, 9450, 9500, 9510, 9550, 9600, 9610, 9650 (1989–2002) |
| Asia / older walker | 1188, 2058, 2256, 2266 series |
A complete retrofit kit — optical yield sensor, GPS antennas, telemetry module and all connectors. Two integration options: standard install on the clean grain elevator (any model), or plug-and-play CANBUS kit on modern Deere with active CAN system.
1. Standard retrofit (any model) — optical sensor head bolts above the clean grain elevator paddles. Cab module handles GPS and 4G sync.
2. CANBUS plug-and-play (modern S/X9/S7/T) — connect through the OEM diagnostic port to use existing factory yield and moisture sensors. No drilling, no permanent modification.
Tell us your model year and serial range — we'll confirm fitment and ship the right kit.
Contact SalesYield monitoring on John Deere combines for every major crop in your rotation:
No. The standard retrofit mounts non-invasively above the clean grain elevator using existing service points. The CANBUS option uses the OEM diagnostic port. Neither modifies factory wiring or software.
Yes. Shapefile exports import directly into Climate FieldView, AgLeader SMS, Trimble Ag and any FMIS that accepts the standard format.
Yes — this is one of the most common installations. Legacy 9000-series machines are simpler to retrofit than modern ones because there's no factory CAN system to integrate with.