Does the kit measure small canola seeds accurately?

Yes. The optical sensor is tuned for the small seed size and high oil content of canola and oilseed rape. Volumetric flow measurement removes the test-weight issues that plague impact-plate monitors on canola.

Which canola / rapeseed combines is the kit compatible with?

All combines used for canola and OSR: John Deere T-Series, W-Series, S-Series, X9 and older walker combines; CLAAS Lexion, Trion, Tucano, Dominator; New Holland CR, CX, TC and legacy TX; Case IH Axial-Flow and legacy 2188/2388/2588; Fendt and Massey Ferguson IDEAL; Deutz-Fahr C-series; Rostselmash Acros and Vector; Sampo Rosenlew Comia and Tornado.

Does it work for winter rapeseed in the EU and spring canola in Canada?

Yes. Winter OSR in the EU and UK, spring canola in Canada and Australia all run on the same kit. Variety differences are handled automatically — no manual calibration when switching fields.

How is moisture handled for canola?

Inline moisture sensor on the clean grain elevator provides live moisture readings; dry-yield maps are calculated automatically using the standard 8.5% canola moisture base (or your custom contract moisture).

Canola / Rapeseed Yield Monitor — Retrofit Yield Mapping for Any Combine

Built for OSR Harvest

Canola and oilseed rape are notoriously hard on impact-plate yield monitors — small seeds, high oil content, sensitive to handling. Our optical sensor reads seed flow at the clean grain elevator and gives you accurate dry-yield maps from start of swath to end of header pass.

Small-Seed Accurate

Optical sensing tuned for canola and rapeseed grain geometry — no impact-plate density issues.

Direct-Cut and Swathed

Works equally well on direct-cut OSR and pickup-header swath harvest.

Live Productivity Zones

Stream yield, moisture and zones to your phone; export ISOXML for variable rate N planning.

Compatible Canola / Rapeseed Combine Models

Selected models below — walker and rotary combines, modern and legacy.

Brand	Compatible Canola / Rapeseed Combine Models
CLAAS	Lexion 8900, 8800, 8700, 7700, 7500, 7400, 6800, 6700, 5500; Trion 750, 730, 660, 560, 540, 530, 520; Tucano 580, 570, 560, 480, 450, 440, 430, 420; Avero 240; legacy Lexion 770, 580, 480; Dominator 88, 98, 108, 118
John Deere	T-Series T770, T670, T660, T560, T550; W-Series W660, W650, W550, W540; S-Series S770, S780, S790; X9 1000, X9 1100; S7 700, S7 800, S7 900; legacy 9540 WTS, 9560 WTS, 9640 WTS, 9660 WTS, 9680 WTS, 9780 CWS, 9870 STS
New Holland	CX8.90, CX8.80, CX7.90, CX7.80, CX6.90, CX6.80, CX5.90, CX5.80; CR10.90, CR9.90, CR8.90, CR7.90 Revelation; CR11; TC5.90, TC5.80, TC5.70; legacy TX 32, TX 36, TX 65, TF series
Case IH	Axial-Flow 9250, 8250, 7250, 6250, 5250; 9240, 8240, 7140, 6140, 5140; legacy 2588, 2388, 2188, 1688, 1680, 1660
Fendt	IDEAL 10, 9, 8, 7; L-series; C-series 5275C, 6275L, 6335C
Massey Ferguson	IDEAL 9, 8, 7; Activa, Activa S, Beta, Centora, Delta; MF 9505, 8780, 7370
Deutz-Fahr	C9306, C9206, C7906, C7705, C7605, C7506, C7405, C7305, C7206
Rostselmash	Torum 770, 760, 750, 740; Acros 595, 590, 585, 580, 550, 530; Vector 425, 420, 410
Sampo Rosenlew	Comia C6, C8; Tornado; Avenger; legacy 2055, 2065, 2085, 3085

Installs in About 2 Hours

Sensor head mounts above the clean grain elevator paddles; cab module handles GPS and cellular data sync.

✅ No dealer required

✅ Works alongside factory CommandCenter / AFS / IntelliView

✅ Shapefile and ISOXML export

✅ Plug-and-play CANBUS option on modern combines

Frequently Asked Questions

Does it work for both direct-cut and swathed canola?

Yes. The sensor measures grain inside the clean grain elevator, so it does not matter whether the OSR enters the combine via direct-cut header or pickup-header swath.

Can I use the same kit for wheat, barley and oats?

Yes. One kit, every crop your combine processes — see wheat, barley and oats.

Will it export to my farm-management software?

Yes. Shapefile and ISOXML export works with 365FarmNet, John Deere Operations Center, CLAAS TELEMATICS, Trimble Ag, AgLeader SMS and any ISO 11783-10 FMIS.

Canola / Rapeseed Yield Monitor for Any Combine